The Answering Machine
4-4
Erasing
Old
Messages
You’ve
Heard
The memory of your machine fills up as messages are
recorded. Make room for new messages by erasing old
messages that you have already listened to. If the memory
becomes full while recording, your machine beeps a warning
and disconnects the line. The machine will not function as an
answering machine unless you erase the recorded messages.
In this case, the message which was being recorded will be
lost from memory. This is why you should erase old
messages.
To Erase All Recorded Messages
1 Press Erase.
The display asks if you want to erase ALL
messages.
2 Press Start/Enter if you’re sure.
All messages in memory are erased while
displaying ‘ERASING...’.
•If you do not want to erase all messages, press Stop
when asked and the machine returns to Standby
Mode.
To Erase a Selected Message
1 Press Erase while the message is playing.
•BE CAREFUL! Once you have pressed Erase while a
message is playing, there’s no way to cancel or recover
it.
•The selected message is being erased while displaying
‘ERASING...’
