15
GB
Menu System
NOISE REDUCTION
The “Noise Reduction” option in the “Detail Set
Up” menu allows you to automatically reduce
the picture noise visible in the broadcast.
To do this: after selecting the option, press .
Then press or to select Auto. Finally
press OK to confirm and store.
To cancel this function afterwards, select “Off”
instead of “Auto” in the step above.
AV2 OUTPUT
Choose:
• TV to output the aerial source.
• AV1 to output sources connected to
::
::
1/ .
• AV3 to output sources connected to 3
and ≤≤
≤≤
3.
• YC3 to output sources connected to qq
qq
3
and ≤≤
≤≤
3.
If your VCR supports SmartLink, this
procedure is not necessary.
To do this: after selecting the option, press .
Then press or to select the desired output
signal: TV, AV1, AV3, YC3 or AUTO.
If you select “AUTO”, the output signal
will always be the same one that is
displayed on the screen.
If you have connected a decoder to the
Scart
::
::
2/qq
qq
or to a VCR connected to
this Scart, please remember to change back
the “AV2 Output” to “AUTO” or “TV” for
correct unscrambling.
Level 1 Level 2 Level 3 / Function
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring
Auto
TV
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
continued...
Set Up
Language/Country
Auto Tuning
Programme Sorting
Progamme Labels
AV Preset
Manual Programme Preset
Detail Set Up
OK
Detail Set Up
Noise Reduction:
AV2 Output:
RGB Centring
Auto
TV
0
OK
Picture Adjustment
Mode: Personal
Contrast
Brightness
Colour
Sharpness
Hue
Reset
OK
01GBKV25/29RE10K.fm Page 15 Thursday, December 12, 2002 3:56 PM
