28
Adjusting Your Setup (MENU)
Adjusting the ADJUST options under PICTURE MODE
1
Press V or v to select the
desired item (e.g.,
COLOR), then press
ENTER.
2
Adjust the value according to the following table, then press ENTER.
* You can adjust HUE for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select PERSONAL.
Adjusting the ADJUST options under SOUND MODE
1
Press V or v to select the
desired item (e.g.,
BALANCE), then press
ENTER.
2
Adjust the value according to the following table, then press ENTER.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select PERSONAL.
Tip
• For details on the menu system and how to use the menu, refer to
“Introducing the menu system” on page 25.
For
PICTURE
COLOR
BRIGHT
HUE*
SHARP
Press V/b to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
Press v/B to
decrease picture contrast
decrease color intensity
darken the picture
increase red picture tones
soften the picture
For
BASS
TREBLE
BALANCE
BBE
Press
v/B to decrease the bass, V/b to increase the bass
v/B to decrease the treble, V/b to increase the treble
v/B to increase the left speaker’s volume, V/b to increase the right
speaker’s volume
V/v to select HIGH, LOW, or OFF. BBE can produce clear sound,
emphasizing both low and high tones.
b
b
Changing the A/V CONTROL setting (continued)
b
b
ENTER
ENTER
ENTER
ENTER
COLOR
80
BALANCE 00
