A SERVICE OF

logo

40
Chapter 3 Basic Usage
Press v to cycle forward through letters and numbers one at a time, and V to
cycle backwards.
[ENTER] button
This button is used to finalize the displayed menu or value, set alphanumerical
characters, and perform operations.
Finalizes or executes the displayed menu or operation.
Moves the cursor right.
Saves the values.
Input a space (“ ”) to delete unwanted character.
[CANCEL] button
Used to cancel the current operation and set alphanumerical characters.
Returns to the previous menu.
Moves the cursor left.
(Operation example) Set the host name
1
When the server is in the normal standby state, press the [MENU] button
for two seconds.
2
Use the V and v buttons to select
“6.Network”, then press the
[ENTER] button.
“Network” appears.
3
Select “1.Host”, then press the
[ENTER] button.
“Host” appears, and the first
character of the host name flashes.
4
Use the V and v buttons to input the first character.
5
Press the [ENTER] button to flash the next character, then input the
character.
6
Repeat Step 5 to input the rest of the
characters.
7
Press the [ENTER] button.
8
When [[ENTER] to activate]
appears, press the [ENTER] button.
Host name is now set, and the
display returns to “Network”.
9
Press the [CANCEL] button twice to return to the status display.
Menu 12:34
4.SCSI
5.Configuration
6.Network
Network 12:34
1.Host
2.Domain
3.IP Address
Host
LIB-81
Host
MACHINE-NAME
HOST
MACHINE_NAME
[ENTER] to activate