51
Chapter 4 Operating the AIT Library
4
Select the cartridge ejection
method, then press the [ENTER]
button.
• When you want to specify one
slot and eject its cartridge, select
“1. Single Mode”.
• When you want to eject several
cartridges consecutively, select
“2. Multiple Mode”. In this case,
you only need to specify the first slot.
5
Use the V and v buttons to set the
element address of the slot where
the cartridge to be taken out is set,
then press the [ENTER] button.
6
When “[ENTER] to activate”
appears, press the [ENTER] button.
The cartridge dock shutter opens.
Eject 12:34
1.Single Mode
2.Multiple Mode
Slot 01
Slot 01
[ENTER] to activate
