23(E)
Adjusting the Brightness of the
LEDs
You can adjust the brightness of the LEDs of the panel
buttons and indicators.
To adjust the brightness, proceed as follows:
1 Press [RM Adjusting] on the RM Configuration
menu to display the RM adjustment menu.
2 Press and light [LED Bright].
The lower half of the display becomes the LED
Brightness adjustment display.
Switch
50
Other
50
Master
LED
Brightness
Clear
Buzzer
Volume
LED
Bright
Exit
50
3 Adjust the brightness with the corresponding
control knobs (50 is the standard value with all
items).
Switch: Brightness of the built-in LEDs of the
control buttons
Other: Brightness of the other LED indicators/
lamps.
The master brightnesscan be adjusted with the
rightmost control knob (Master).
When the adjustment is completed
Press
[Exit] to leave the menu.
Adjusting the Brightness of the
LCD
You can adjust the brightness of the display of the
menu control block.
Proceed as follows:
1 Press [LCD] on the Maintenance menu to display
the LCD setting display.
50
LCD Brightness
Clear
Bright
Exit
2 Adjust the brightness with the leftmost control
knob (50 is the standard value).
When the adjustment is completed
Press
[Exit] to leave the menu.
