20
EN
Labeling a CD
— Disc Memo/Custom File
(CD changer with custom file function)
You can label each disc with a personalized
name. You can enter up to 8 characters for a
disc. If you label a CD, you can locate a disc by
name (page 21) and select the specific tracks
for playback (page 21).
1 Play the CD and press (LIST) for two
seconds.
2 Enter the characters.
1 Rotate the dial in a clockwise
direction to select the desired
characters.
(A n B n C n ··· Z n 0 n 1 n 2 n
··· 9 n + n – n * n / n \ n > n <
n . n _ )
If you rotate the dial in a
counterclockwise direction, the
characters appear in the reverse order.
If you want to put a blank space
between characters, select “_” (under-
bar).
2 Press (4) (n) after locating the
desired character.
The flashing cursor moves to the next
space.
If you press (1) (N), the flashing cursor
moves to the left.
3 Repeat steps 1 and 2 to enter the
entire name.
3 To return to the normal CD playback
mode, press (LIST) for two seconds.
Tip
To erase/correct a name, enter “_” (under-bar) for each
character.
Displaying the disc memo
Press (DSPL) during CD playback.
Each time you press (DSPL) during CD
playback, the item changes as follows:
Disc memo ˜ Clock
Erasing the disc memo
1 Press (SOURCE) to select the CD changer.
2 Press (LIST) for two seconds.
3 Press (DSPL) for two seconds.
“Delete” and the disc memo appear in the
display.
4 Rotate the dial to select the name that
you want to erase.
5 Press (5) (ENTER) for two seconds.
The name is erased.
Repeat steps 4 and 5 if you want to erase
other names.
6 Press (LIST) for two seconds.
The unit returns to the normal CD playback
mode.
CD1
S_______
4 2 1.51
SUREQ
DISC TRACK
DISC NAME
CD1
S_______
4 2 2.2‚
SUREQ
DISC TRACK
DISC NAME
CD1
SCHUBERT
4 2 3.59
SUREQ
DISC TRACK
DISC NAME
CD1
________
4 2 1.13
SUREQ
DISC TRACK
DISC NAME
