SOYO SY-6IWM Manual

A SERVICE OF

next previous

SY-6IWM

Quick Start Guide

12

Hardware

Installation

Step 7. CMOS Clear (JP5)

After you have turned off your computer, clear the CMOS memory by momentarily shorting

pins 2-3 on jumper JP5, for a few seconds. Then restore JP5 to the initial 1-2 jumper setting

in order to recover and retain the default settings.

Jumper JP5 can be easily identified by its white colored cap.

CMOS Clearing

Clear CMOS Data Retain CMOS Data

JP5 Setting

Short pin 2-3 for

at least 5 seconds to

clear the CMOS

Short pin 1-2 to

retain new settings

Note: You must unplug the ATX power cable from the ATX power connector when

performing the CMOS Clear operation.

1

2

3

1

2

3