OPERATION INSTRUCTION continued
Conversion Table for Image Quality and Encoding Rate
HDD Store Mode: "Centralize, Individual, Compound" are 3 different hard disk storing modes
available in here. Using the cursor to select and press [Enter] to confirm this function:
• Centralize: All video signal and sound signals are stored into same one hard disk, and
then continuously with the next hard disk after the current one becomes full.
• Individual: Each channel of video signal and sound signals are stored into a different
hard disk, for example channel 1 recording into HDD1, and channel 2 recording into
HDD2.
• Compound: Channel 1 and 2 video and sound signal only record into HDD1 and
HDD2, taking into HDD1 first and then using HDD2 after the HDD1 is full. At the same
meaning that, Channel 3 and 4 video signal and sound signal only recording into
HDD3 and HDD4, taking into HDD3 first and then using HDD4 after HDD3 full.
Return: Using the cursor to select and press [Enter] to confirm back to main menu.
A-3 Timer Record Setting:
Highlight and select "Timer Record", then press [Enter]for this selection, the sub-menu will
shown (as below).
Timer Record: "On, Off" are the 2 different status settings. Use the cursor to select and press
[Enter] to confirm this function. While timer selected, there will be 16 different setting tasks
for timer setup in each channel (8 different day types, and 2 different period settings avail-
able for each type):
GENERAL SETTINGS
Record Settings
Timer Record
Motion Detection
Alarm Record
Channels
Housings
Network
Language
Exit
Timer Record Settings
Ch Timer Motion_Mode
1 On Off On Off
2 On Off On Off
3 On Off On Off
4 On Off On Off
Channel 1 Timer Record Settings
Date Period 1 Period 2
Everyday 08:00-12:00 14:00-18:00
Mon 08:00-12:00 14:00-18:00
Tue 08:00-12:00 14:00-18:00
Wed 08:00-12:00 14:00-18:00
Thurs 08:00-12:00 14:00-18:00
Fri 08:00-12:00 14:00-18:00
Sat 08:00-12:00 14:00-18:00
Peak 08:00-12:00 14:00-18:00
Return
