Galaxy II Operating Manual A5
Color On Pin Number Wire Color On
Power Cable Main Harness Coin Door Harness
Brown 12 Black
Blue 11 White
Green/Yellow 10 Green
The two white 12 pin
connectors in the coin
door area can now be
connected together. The
other end of the power
connector should be
routed into the top cabi-
net, behind the monitor,
and plugs into the recep-
tacle next to where the
monitor is plugged in.
6. Attach ferrite suppressor as shown in picture #3.
Notice that it is placed over the wire cable from the
bill acceptor, not the Arachnid supplied harness.
Also notice the two plastic wire ties used to keep it
in place, one on each side of the ferrite bead.
7. The game can now be
powered up. The recom-
mended setting for the
Mars bill acceptor would
be four pulses per dollar.
See the Mars bill acceptor
book for directions on
how to set the options. In
the Galaxy II Test Mode,
Machine Setup, make
sureto set the COIN
SLOT ASSIGNMENT #3
to 1 COIN = 1 CREDIT.
Picture #2
PIN 10
GREEN
/YELLOW
PIN 11
BLUE
PIN 12 BROWN
Picture #3
If there are any problems with these instruc-
tions, please call 1-800-435-8319 and ask for
technical support.
