A SERVICE OF

logo

Caring for Your Printer
4
User Manual
4-23
3.
If the problem persists, replace the fuser wiper (refer to “Changing
the fuser wiper” on page 4-4 for details).
If the problem continues, follow these procedures, explained in detail on the
following pages:
Procedure A: Enter Utilities mode and clean the fuser with blank
paper.
Procedure B: Enter Utilities mode and clean the fuser roller with
the fuser cleaning pad.
Note
For your convenience, you may order a package of five fuser wiper
pads (order number 650-2564-00); call the Tektronix Graphics
Supplies Order Desk toll-free in the U.S. at 1-800-835-6100, or
call your local Tektronix dealer.