Traxxas 2401 Manual

A SERVICE OF

next previous

6

STEP A-11

Apply a light coating of silicone grease on the teeth of the top gear. Install

the top gear shaft into the left gearbox half as shown.

STEP A-12

Locate the idler gear shaft and install it into the left gearbox half as shown.

Do not grease the ends of the shaft where they insert into the plastic. Slide a

5x8x0.5mm teflon washer over the idler gear shaft.

STEP A-14

Slide the idler gear over the idler gear shaft, followed by another 5x8x0.5mm

teflon washer.

STEP A-15

Locate the main-differential assembly. Apply a light coating of grease to the

teeth on the gear. Install the differential into the left gearbox housing,

pushing the output shaft through the ball bearing.

NOTE: The side of the differential with the screws should face down

toward the left gearbox half (as shown).

STEP A-13

Locate the idler gear. Press a 5x11mm ball bearing into each side of the gear.

Apply a light coating of silicone grease to the gear teeth.