A SERVICE OF

logo

3301770
NOTE:
It is recommended not to change the rest of the BIOS menu options under this
category. The default setting will work properly for the majority of applications.
4.8 Peripheral Setup Selections
OnBoard FDC
This option allows you to enable/disable the onboard floppy disk controller.
OnBoard Serial Port#
This feature allows you to disable the onboard serial port or to manually select the I/O
address and IRQ for it.
Serial Port2 Mode
This feature allows you to assign serial port2 to function as the IrDA device connector.
On-Board Parallel Port
This option specifies the base I/O port address of the parallel port on the motherboard. The
settings are Disabled, 378h, 278h, or 3BCh.
Parallel Port Mode
This option specifies the parallel port mode. The settings are Normal, Bi-Dir, ECP, and EPP.
Normal:
The normal parallel port mode is used.
4-17