A SERVICE OF

logo

3301770
WARNING!
The new power adapter cable has its “Ground” pin removed from the
3-pin ATX feature connector. If you connect the power feature
connector cable previously provided by GAI, you will destroy the
3301770 board.
Figure BT-2 ATX Power Adapter Cable
Step 3. To turn on the system press the button once. To turn off the power supply press
the ATX power switch button for about 4 seconds.
2. Using AT Power Supply
The connection to an AT power supply is as simple as connecting a 4P power connector
to CN1. Power on or off is controlled by the power switch on the AT power supply.
B-3