A SERVICE OF

logo

Open as PDF
next previous
OVEN LIGHT SWITCH OVEN SELECTOR
SURFACE UNIT INDICATORS
OVEN TEMPiRATURE
RIGHT REAR ’
RIGHT FRONT \
CONTROL
CONTROL KNOB
CONTROL KNOB
Using the surface units
Surface Unit Indicators
The solid dot in the surface unit
indicator shows which surface unit
is turned on by that knob.
Signal light
Control knobs must be pushed in
before turning them to a setting. They
can be set anywhere between HI
and OFF.
One of the signal lights will glow
when a surface unit is on.
Until you get used to the settings, use the following as a gulde. For best results,
start cooking at the high settings; then turn the control knob down to continue
cooking.
Use HI to start
Use MED-HI Use MED
Use MED-LO
foods cook-
to hold a
for gravy,
to keep food
ing; to bring
rapid boil; to
puddings
cooking after
liquids to a
fry chicken
and icing; to
starting it
boil.
or pancakes.
cook large
on a higher
amounts of
setting.
vegetables.
CAUTION: The use of the HI sefflng ior long pertods of ttme
can damage surface units and discolor chrome reflector
bowls. Start cooklng on HI and turn control down to con-
ilnue cooklna.
Use LO to
keep food
warm until
ready to
serve. Set the
heat higher
or lower
within the LO
band to keep
food at the
temperature
you want.
5