A SERVICE OF

logo

5-34 Ethernet Setupbb ______________________________________
5. Select the appropriate printer and click “+” next to the selected
printer. Highlight the print queue and click OK.
6. Continue through the remaining instructions and select the
correct PPD for your printer. A test page will verify that your
system is configured correctly.
Your XANTÉ printer is added to the list of available printers.
Default Printer Setup
To select the XANTÉ printer as the default printer
1. Click Start and select Settings and Printer.
2. Right click the printer and select “Set as default.”
Your XANTÉ printer is set as the default printer.
Note: Make sure NetBEUI is enabled on the printer’s front panel in
the SETUP :IF: NETBEUI menu.