A SERVICE OF

logo

Open as PDF
next previous
2-16 Installationbb_________________________________________
5. Align the paper stack and load it into the cassette print side up,
leading edge to the back. See “Media Sources” in chapter 7 to
determine whether to load media short or long edge first (fig.
2.20).
Fig. 2.20 Load the Paper
6. Adjust media guides to the size of the paper stack.
Caution: To prevent paper jams, make sure the paper fits
between the paper guides and under the cassette’s
retaining clips (fig. 2.20).
7. Replace the cassette cover.
8. Slide the cassette into the printer until it snaps into place.
Note: You will feel a slight resistance as you push the
cassette into the printer caused by the catch that
prevents the cassette from being dropped.