IES-5000 Series User’s Guide
24 Chapter 2 Unit Data
This table describes the IES-5000 splitter chassis dimensions and weight (excluding card
weights)
2.1.3 Wire Gauge Specifications
This table describes the wire gauge specifications of the IES-5000.
AWG (American Wire Gauge) is a measurement system for wire that specifies its thickness.
As the thickness of the wire increases, the AWG number decreases.
2.1.4 Power Specifications
This table describes the maximum power consumption of the IES-5000.
Use a –48 VDC power source with 700 W minimum output for the IES-5000M or 350 W
minimum output for the IES-5005M. See Section 2.3 on page 26 for more information.
2.1.5 Operating Environment
• Temperature: 0°C ~ 50°C
• Humidity: 5% - 95% (non-condensing)
2.1.6 Storage Environment
• Temperature: -40°C ~ 70°C
Table 3 Splitter Chassis Dimensions and Weights (Without Cards)
CHASSIS DIMENSIONS WEIGHT
IES-5000ST Chassis 440 mm (W) x 280 mm (D) x 240 mm (H) 10.4 kg
IES-5005ST Chassis 440 mm (W) x 280 mm (D) x 125 mm (H) 6.6 kg
Table 4 Wire Gauge Specifications
WIRE TYPE
REQUIRED AWG NO.
(DIAMETER)
Ground Wire 12 or larger
Telephone Wire 26 or larger
Power Wire 12 or larger
Table 5 Power Specifications
UNIT CONSUMPTION IN WATTS VOLTS DC AMPS
IES-5000M Chassis 700 -48 to -60 20
IES-5005M Chassis 350 -36 to -72 10
