Filter
Top Products
Page 17
Connecting to Ethernet V2.0
and IEEE 802.3 Controllers
Refer to Table 4 for the settings to use for con-
necting the transceiver to Ethernet Version 2.0
and IEEE 802.3 controller devices.
* May be Disabled for IEEE compliance.
Table 4. DIP Switch Settings for Ethernet
V2.0 and IEEE 802.3 Controllers
Ethernet
V2.0
Controllers
IEEE 802.3
Controllers
SQE Test Enabled Enabled
Alternate
Collision Mode
Enabled * Enabled *
Half Step Mode Enabled May be
Disabled