Filter
Top Products
Page 18
Connecting to Ethernet V2.0
and IEEE 802.3 Repeaters
Refer to Table 5 for the settings to use for
connecting the transceiver to Ethernet Version
2.0 and IEEE 802.3 repeaters. The transceiver DIP
switches must be changed for connection to IEEE
802.3 Repeaters.
Table 5. DIP Switch Settings for Ethernet
V2.0 and IEEE 802.3 Repeaters
Ethernet V2.0
Repeaters
IEEE 802.3
Repeaters
SQE Test Disabled * Disabled
Alternate
Collision Mode
Disabled * Disabled
Half Step Mode Disabled * Disabled