Filter
Top Products
12 English Bair Hugger Model 505 Temperature Management Unit Operator’s Manual
3M Patient Warming 3M Health Care.
Check the 3M
TM
Bair Hugger
TM
therapy website to ensure you have the most recent version of this document. www.bairhugger.com reorder #202431A
General Maintenance
Cabinet Cleaning
1. Disconnect the temperature management unit from the power source before cleaning.
2. Use a damp soft cloth and a mild detergent to clean the unit cabinet. Dry with a separate soft
cloth.
Caution
• Do not use a dripping wet cloth to clean the cabinet. Moisture may seep into the electrical
contacts, damaging the components.
• Do not use alcohol or other solvents to clean the cabinet. Solvents may damage the labels and
other plastic parts.
Technical Service and Order Placement
,
Tel: 1-800-228-3957
In-Warranty Repair and Exchange
Replacement parts to correct a problem are delivered at no charge. To return a device to 3M Patient
Warming for service, first obtain a Return Authorization (RA) number from a technical service
representative. Please use this number on all correspondence when returning a device for service.
A shipping carton will be delivered to you at no charge, if needed. Call your local supplier or sales
representative to inquire about loaner devices while your device is being serviced.
When You Call for Technical Support
Remember, we will need to know the serial
number of your unit when you call us. On Model
505 units, the serial number label is affixed to
the rear panel.
Figure J. Serial number label on Model 505
Serial number label