3M eg4 Marine Instruments User Manual


 
Docking station functionality
Powering EdgeDock1 or EdgeDock5
053-644, Rev E Page 13 eg4 & eg3
13
Powering EdgeDock1 or EdgeDock5
1. Assemble the charger adapter and plug adapter as illustrated in Figure 2-5. (It will be the
same process for an EdgeDock5.)
2. Plug the charger adapter directly into the wall (electrical wall plate).
3. Plug the opposite end into the power connector (or jack) of the EdgeDock1.
NOTE: a light, solid red light will appear indicating power to the charger.
Figure 2-6: Attaching charger adapter to EdgeDock1 and EdgeDock5
EdgeDock1 LED indicator
Amber indicates “ON”.
Charger adapter cord