Filter
Top Products
Viewing measurements on the display
Locking or Securing
053-644, Rev E Page 40 eg4 & eg3
40
How to lock or secure
1. Turn the dosimeter on and press the run/stop button to begin logging your study.
2. To enable the lock, press run/stop button three consecutive times within one
second intervals.
The Lock screen will appear.
Figure 4-10: Locking/Securing run
NOTE: If lock/secure run does not activate, please check that locking is set-up on your
dosimeter. Please see “How to set-up secure/lock”, page 30 for further details.
How to unlock
1. To unlock, press run/stop button 3 consecutive times, within one second
intervals, and then press the on/off enter button.
a. If the padlock icon and the key indicator were on the screen, these will vanish and
the measurement view will appear along with the run indicator.
b. If you enabled the lock feature (with the key indicator showing and the
measurement view showing), then the key indicator will disappear.
2. To stop your study, press the on/off enter button and the 3, 2, 1 will display as it
ends the study.
a. To download and view your results in DMS, please see Chapter 5.
Padlock icon
Secure all
Key indicator
Indicates dosimeter is
locked while running.