3M WSMONITOR 2 Marine Instruments User Manual


 
4
WARNING
To reduce the risks associated with fire and explosion:
Do not use in an explosive environment - monitor is not designed to be intrinsically safe.
To reduce the risks associated with medical device malfunction:
Persons with heart pacemaker devices should never use this monitor.
To reduce the risks associated with hazardous voltage and fire:
Use only the power supply provided by 3M and specified for the country of use.
Do not position the monitor accessories or other equipment where unplugging the power supply is difficult.
Always locate the power source (socket or outlet) near the equipment. The power supply plug serves as
the disconnect device.
Do not modify or attempt to service the power supply or monitor; there are no user serviceable parts.
Do not use the power supply if damaged;
Replace power supply if damaged using only 3M supplied parts.
Do not use the 3M
Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 or their power
supplies outdoors in wet/humid environments.
Do not use the Constant Monitors WSMONITOR1, WSMONITOR 2, WSMONITOR3 or their power supplies
outside of the operating conditions listed in this user’s guide.
Always follow instructions for installation as stated in this user’s guide.
CAUTION
To reduce the risks associated with environmental contamination:
Dispose of this monitor in accordance with all applicable local and government regulations.
NOTICE
To reduce the risk of ESD damage to components or assemblies being handled:
Monitor must be checked periodically to verify each test mode is functioning correctly.
Ensure proper operation of monitor by performing operational verification test as required.
Ensure tester is properly grounded.