Filter
Top Products
9
Operation
• Place a wrist band on your wrist and plug the coiled cord banana plug into
the monitor’s banana jack. The monitor will display a green light when a
functional wrist strap with good skin contact is connected to the unit.
• The unit will sound an alarm and display a red light if the wrist strap becomes
defective or if the person is not in contact with the band.
• Unplug the wrist strap coiled cord from the unit to stop the alarm.
• Monitor will alarm if the continuity from the monitor to the mat to ground is
lost.
Calibration / Verification
Adjustments or calibration are not required for the 3M
™
Constant Monitors
WSMONITOR1, WSMONITOR2, WSMONITOR3. The TMTOOL unit
simulates a correctly functional person and wrist strap (Accept) and an open
circuit (Reject). The TMTOOL also simulates high resistance for verification of
your work surface.