3M WSMONITOR 2 Marine Instruments User Manual


 
8
3M
Constant Monitor WSMONITOR3
1. Check that you have received all parts: monitor, remotes, four screws, power/
ground adapter, mat cord and industrial hook and loop.
2. Using the hook and loop, mount the monitor under the workbench shelf.
3. Mount the remotes to the work bench with screws.
4. Connect the monitor to the STACKJACK.
5. Remove a plastic cap from STACKJACK and snap it to the mat.
6. Connect the other mat snap to ground. (Cable not included.)
7. Plug the power/ground adapter into the back of the monitor and into a power
outlet.
Note: The mat connection monitoring function can be connected to a workbench with a hard work
surface.
AC ADAPTER
BENCH MAT
MONITOR
SHELF
REMOTE
REMOTE
HOOK & LOOP
WRIST STRAP
WRIST STRAP
WORK BENCH
(cable not
included)
STACKJACK
REMOVE CAP
3M
Constant Monitor WSMONITOR3