Filter
Top Products
Line Type
Code: #202
Description:
Identifies each outside line as being connected to the local tele-
phone company or to a PBX or a Centrex system. See appendix A for more
information on programming for PBX or Centrex.
Valid Entries:
✓
1 = CO (local telephone company line)
2 = PBX or Centrex line
Considerations:
■ If any lines are connected to a PBX or a Centrex system, use procedure
#106, PBX Dial-Out Code, to identify the PBX/Centrex dial-out code.
■ If any lines are connected to a Centrex system, use procedure #107, Recall
Timer Duration, to change the recall timer to 800 milliseconds.
Programming Steps:
1. Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ # ] [ 2 ] [ 0 ] [ 2 ] . The
display reads:
Line Type
Line:
2. Enter the first line to be programmed. For example, to program line 1,
press [ 1 ]. The display reads:
Line Type L1
1 co
3. To change the line type, press [ Next Data ] . The display reads:
Line Type L1
2 PBX
To program another line, press [ Next Item ] or [ Prev Item ] until the correct line number shows
on the display. Follow step 3 to change the line type. Repeat for every line in the sys-
tem.
3-10 System Programming