Filter
Top Products
25
Integrating Fiberlink MaaS360 with Cisco Identity Services Engine
Figure 17 Enrollment Network Flows
293804
APNS/GCNMDMDevice
Authenticate
User
WebEnroll
Policy
Assessment
Mobileconfig
(mdm, cert)
MDM
Profile
Check-in
Notification
Device
Check-in
Security
Scan
Profile
Install
APNS
Registration
MDM Check-in
Request
SCEP
Fiberlink MaaS360 can provision certificates onto the device via SCEP-PROXY. This allows
profiles to contain a payload that provisions a service that requires authentication via a certificate
and another payload contains the associated certificate. One such example is VPN payload for
either AnyConnect or Cisco IPsec. This is discussed in more detail in Application Distribution.
Mobile Client Application—Fiberlink MaaS360 Agent
As discussed in the BYOD CVD, before the Fiberlink MaaS360 agent is installed, Software
Provisioning Wizards (SPW) must be downloaded from Cisco site. For Apple iOS devices, access
to the application store is not required. However, for the Android devices, the Software
Provisioning Wizard (SPW) package needs to be downloaded from Google Play Store.
The following features require the Fiberlink MaaS360 agent be installed on the device:
• Jailbreak Detection
• Location Based Services
• Application Inventory (for blacklist, mandatory apps)
• Document Distribution
• Data Usage Tracking
• WiFi SSID Connection Tracking
• Admin to user messaging via the portal (or ISE)