Filter
Top Products
31
Integrating Fiberlink MaaS360 with Cisco Identity Services Engine
• Manage and distribute third-party and in-house mobile apps.
• Allow users to view, install, and be alerted to updated apps on a private catalog.
• Manage mobile app lifecycle workflow to all devices, device groups, and individual devices.
• Administer mobile app security and compliance policies.
• Host and distribute in-house developed mobile applications.
• Support for Apple App Store Volume Purchase Programs (VPPs).
Fiberlink MaaS360 supports both push and pull model for application distribution. Users can
“pu
ll” them from Enterprise Application Store on their devices or administrator can choose to
“push” applications to the user’s device. In case of “push”, the user is prompted to accept the
installation o the f application.
Figure 24 shows the installation of the Maas360 Applicat
ion, which occurs right after the MDM
profile has been installed. Any additional applicat
ion may also be installed at this time as
configured as a part of the Application compliance requirements on Fiberlink MaaS360. In this
scenario, the Cisco Jabber application is pushed by Fiberlink MaaS360 and installed to the device
as shown.
Figure 24 Installation of Maas360 Application
The Maas360 application is shown in Figure 25. It shows device information details and can be
used to receive messages sent by the Administrator. The “Settings” tab allows the user to perform
actions, such as enable PIN loc
k on the enrolled device/s by the respective user.