Filter
Top Products
3-11
Cisco Catalyst 4900M Switch Installation Guid e
78-18350-02
Chapter 3 Installing the Switch
Connecting DC-Input Power to the Catalyst 4900M Switch
Figure 3-7 D C Power Cab le Lug Dim ensions
Note The source DC cables and the terminal block lugs should be sized according to local and national
installation requirements and electrical codes. Use only copper wire.
90 degrees +/- 5 degrees
.25 in
(6.35 mm)
0.50 in
(12.7 mm)
0.09 in
(2.29 mm)
1.25 in
(31.75 mm)
0.81 in
(20.574 mm)
1.16 in
(29.464 mm)
1.47 in
(37.3 mm)
0.62 in
(15.75 mm)
0.22 in
(5.588 mm)
0.34 in
(8.64 mm)
0.27 in
(6.858 mm)
Beveled wire entry
331382