Filter
Top Products
Operating Instructions
9
LEVEL
PROG RAM
NORMAL
HARD
SPEEDY
GENTLE
SOAK
START/PAUSE
POWER
COLD
HOT
MEDIUM
LOW
EXTRALOW
FUNC TION
FULLYAUTOMATICW ASHINGM ACHINE
WASH
SPIN
HIGH
WA TER
SUPPLY
2 3 4 5
67
8
9
1
10
WA TER
RINSE
CONTROL PANEL
1. Water Temperature Indicator
2. Water Level Indicator
3. Wash Mode Selection Indicator
4. Process Selection Indicator
5. Start/Pause Button
6. Power Button
7. Function Selection Button
8. Wash Selection Button
9. Water Level Selection Button
10. Water Temperature Selection Button
PREPARATION
0.7m~1.2m
1) Connect the inlet hose and
turn on the faucet, Don’t
switch on the power if water
pressure is lower than 0.05
Mpa and higher than 0.5
Mpa.
2) Open the faucet.
3) Put the plug into the
socket. For safety the plug
should have ground
connection.
4) Insert the end of the drain
hose into the hook shelf,
and hang the drain hose
over a drain outlet.
5) Put the wash load
into the tub and
close the lid.
If the lid is not
closed the washing
machine will not
operate.
6) Add the suitable quantity
of detergent into the
detergent dispenser.