Filter
Top Products
Rev. 03/04
Rev. 03/04
Product Specications
Temperature Ranges 0 to -100°F/C, 0 to -50°F /C, -50 to 50°F/C, 0 to 50°F/C,
(user selectable): 50 to 100°F/C, 0 to 100°F/C, 0 to 250°F/C
Recorder Accuracy: ±.5% of chart range and ±1.8°F (1°C) Recorder only
Sensor Compatibility:
Standard K-Thermocouple (other temperature sensor types
available on special order)
Ambient Operating Conditions: +32 to +122˚F (0 to +50˚C) 0 to 95% RH (non-condensing)
Recording Time (user selectable): 24 hour and 7 day
Power: 120V 50/60Hz (240V 50/60Hz models available)
Power Cord: 6’ (2m), cord with wall transformer
Power Status: LED indicator
Battery Back-up: One 9V alkaline battery
Battery Back-up Life: Up to 24 hours
Probe:
4’ Teon coated K-Thermocouple beadwire probe with
mini-connector
Calibration: User: Adjustable zero point; Factory: zero and span
Chart Size: 6” (152mm) diameter
Alarm Contacts:
User selectable MAX/MIN set points (set in conjunction with
alarm contacts)
Digital Display: LCD 3.5 digit
Keypad Functions:
ON/OFF, pen home, time adjust, alarm set (available) and
calibration
Digital Display Resolution:
0.1˚ resolution -9.9˚ to 199.9˚; 1˚ resolution above 200˚ and
below -9.9˚
Response Time: 30 seconds at 63% of full scale
Mounting: Surface or panel mount, DIN compatible
Enclosure Dimensions: 7.56” x 7.56” x 3.25” (192mm x 192mm x 83mm)
Panel Cut-out Dimensions: 6.9” x 6.9” (188mm x 188mm)
Depth Behind Panel: 2.0” (51mm)
Included With Recorder:
AC Adapter, Pen 9V Battery, Starter Pack of (C657) Charts and
4’ Bead Wire Probe
Product
Specications
Operating
Information &
Display Symbols
Charts &
Accessories
Instrument
Anatomy
Getting
Started/
Installation
Keypad
Operation
Dip Switch
Setup &
Calibration
Troubleshooting
Warranty &
Returns
DICKSON
KT603
KT655