Eagle Electronics 250 DS Fish Finder User Manual


 
47
Alarms
Your sonar unit has four alarms: fish, shallow, deep and battery.
NOTE:
If one of the alarms goes off, press
PWR to silence the alarm. It will
remain silent until it is triggered again.
Fish Alarm
The Fish Alarm sounds a tone when a fish symbol appears on the
screen. The Fish I.D. feature must be turned on for fish alarms to work.
To turn on Fish I.D., repeatedly press
MENU until the FISH ID menu ap-
pears. Press
to select ON, then press MENU UP and the FISH ALARM
menu will appear. Press to select ON and press PWR.
To turn off the fish alarm, repeatedly press
MENU until the FISH ALARM
menu appears. Press to select OFF, then press PWR to clear the menu.
Fish Alarm menu.
Depth Alarms
The depth alarms are triggered only by the bottom signal. No other
echoes will activate these alarms. The depth alarms consist of a shal-
low and a deep alarm. The shallow alarm sounds an alarm when your