Filter
Top Products
IntelliGear Plus™ Variable Speed MD Gearmotors
8
3.3 Wiring diagram based on standard configuration
NOTE:
IF AUTO MODE RUN/STOP CONTACT IS NOT USED, 4-20mA INPUT
CONNECTOR PINS 5 & 6 MUST BE JUMPERED TO RUN IN AUTO
MODE.
User supplied male Turck connectors can be secured locally using the
following information -
5 pin connector with 4 meter cable attached = Turck # SB5T - 4
6 pin connector with 4 meter cable attached = Turck # SB6T - 4