Filter
Top Products
10
W4473pr-0920
ASSEMBLY
• Turn the vehicle on its side.
• Insert the end of the steering column through the hole
in the steering rod.
• Fit the steering column cap onto the end of the
steering column.
Steering
Column Cap
#10 x
3
/
4
"
(1,9 cm) Screw
End of
Steering
Column
Steering
Rod Hole
Steering
Column
Cap
BOTTOM VIEW
FRONT VIEW
8
9
• Insert a #10 x
3
/
4
"
(1,9 cm) screw through the large
opening in the steering column cap and into the hole
in the steering column. Tighten the screw.
• Turn the vehicle upright.
Hood
Latch
Slot
Hood
Latch
Slot
• Insert a hood latch into one of the slots in the front
end of the vehicle.
• Twist the base of the hood latch
1
/4 turn to secure it in
the vehicle.
• Repeat this procedure to attach the other hood latch to
the vehicle.
10
Hood
Tabs
Slot
Slot
• Insert the tabs on the hood into the slots in the front
end of the vehicle.
• Pull the hood forward and lower it closed.
11