Filter
Top Products
13
W4473pr-0920
ASSEMBLY
SIDE VIEW
21
20
• Fit a support to one side of the sport bar.
• Insert a #8- 32 x 1
5
/8
"
(4,13 cm) screw through the
support, the sport bar and out through the support.
• Fit a #8 acorn lock nut to the end of the screw.
• While holding the acorn lock nut with an adjustable
wrench or pliers, tighten the screw.
• Repeat this procedure to fasten the other support to the
sport bar.
Sport Bar
Supports
Sport Bar Support
Side
Fender
PULL
UP
PUSH
DOWN
• Fit the sport bar assembly into the holes in the top
side of the vehicle.
• Push down firmly on a sport bar support while
pulling up on the side fender to fit the sport bar into
the vehicle.
• Repeat this procedure on the other side of the vehicle.
• Turn the vehicle on its side.
• Insert two #10 x
3
/4" (1,9 cm) screws into the holes
(behind the rear wheels) in the underside of each rear
wheel well, through the vehicle and into the ends of
the sport bar. Tighten the screws.
• Next, insert two #10 x
3
/4" (1,9 cm) screws
into the
holes (in front of the rear wheels) in the underside of
each wheel well, through the vehicle and into the ends
of the sport bar. Tighten the screws.
BOTTOM VIEW
22
Rear of
Vehicle
Door
• Fit a door into the groove on the side of the dash.
Hint: Each door is designed to fit one way. If the door
does not fit, try the other door.
SIDE VIEW
23