Filter
Top Products
11
W4473pr-0920
ASSEMBLY
• Position the windshield so that the molded detail on
the wipers faces the front end of the vehicle.
• Insert and “snap” the two large tabs on the windshield
into the large slots in the dash.
• Pull up on the windshield to be sure it is secure.
Windshield
Large
Tab
Large
Tab
Large Slots
Brush Guard
Front Bumper
• Fit and hold the brush guard against the front bumper.
• Insert two #10 x
3
/4" (1,9 cm) screws into the brush
guard and tighten.
13
12
• Fit two spacers between the grille and the back of the
brush guard, as shown
A
.
• Insert two #8 x 3" (7,6 cm) screws through the inside
of the headlight, the spacers and into the holes in the
grille
B
. Tighten the screws.
Spacers
Grille
A
B
#8 x 3" (7,6 cm) Screws
Brush Guard
Light
Covers
Headlights
14
• Fit the light covers to the headlights.
• Insert a #10 x
3
/4" (1,9 cm) screw into each light cover.
Tighten the screws.
15