Filter
Top Products
setsnmp(8)
226 SPARC Enterprise Mx000 Servers XSCF Reference Manual • Last Revised March 2008
disable When used alone, stops the SNMP agent.
When used with the value ALL for the optional mib_name, stops
the SNMP agent.
When used with a value other than ALL for the optional
mib_name, removes support for the targeted MIB module. If
support remains for another MIB module, the SNMP agent
remains enabled. If support for both MIB modules is removed,
the SNMP agent is disabled and, therefore, stops. You can specify
only one value at a time for mib_name.
mib_name
Name of the MIB module to be disabled.
Valid MIB modules are:
SP_MIB = OPL-SP-MIB
FM_MIB = SUN-FM-MIB
ALL = All the MIB modules in this list.
disablev1v2c Disables the SNMP agent from communicating using SNMPv1/
v2c. These versions provide insecure SNMP communication.
enable When used alone, activates the SNMP agent with support for all
MIB modules.
When used with the value ALL for the optional mib_name,
activates the SNMP agent with support for all MIB modules.
When used with a value other than ALL for the optional
mib_name, adds support for the targeted MIB module and, if
necessary, activates the SNMP agent. You can specify only one
value at a time for mib_name.
mib_name
Name of the MIB module to be enabled.
Valid MIB modules are:
SP_MIB = OPL-SP-MIB
FM_MIB = SUN-FM-MIB
ALL = All the MIB modules in this list.
enablev1v2c Enables the SNMP agent to communicate using SNMPv1/v2c.
These versions provide insecure SNMP communication, which is
why the agent runs SNMPv3 by default. This agent is read-only.
The only community string asked for is read-only.