Furuno 1942 MARK-2 Marine RADAR User Manual


 
6-3
3. Select “ARP-10 MENU.”
4. Press the [ACQ/ENTER] key to display
the ARP menu.
[ ARP MENU ]
Select item by omnipad
and press ENTER key.
1. Display
2 . All Cancel
3 . Vector Ref
4 . Vector Length
5 . History
6 . CPA Set
7 . TCPA Set
8 . Auto ACQ
Off On
Rel True
30S IM
3M 6M 15M 30M
Off 15S 30S 1M
2M 3M 6M
Off 0.5 1nm 2nm
3nm 5 nm 6nm
30S 1M 2M 3M
4M 5M 6M 12M
Off On
Figure 6-1 ARP Menu
5. Select the menu item “1. Display.”
6. Select “On.”
7. Press the [ACQ/ENTER] key.
8. Press the [MENU] key to close the menu.
Deactivating the auto plotter
To deactivate the Auto Plotter;
1. Open the “ARP-10 MENU.”
2. Select the “1. Display.”
5. Select “Off.”
6. Press the [ACQ/ENTER] key.
7. Press the [MENU] key to close the menu.
HDG 234.5°
SP
HU
8
NM
2
TRAIL
30M
ZOOM
ES1
AUTO
25:38
G (OUT)
VRM
0.048NM
0.100NM
13.5 R
°
0.142NM
A/C
AUTO
EBL
345.6 R
23.0 R
°
°
TRUE VECTOR
15 MIN
BEARING 42.5°T
RANGE 5.36 NM
CPA 2 NM
COURSE 287.8°T
SPEED 12.5 KT
TCPA 12:35
Auto Plotter
Data Area
Target under auto tracking but not
selected for cursor data reading
Target selected
for data reading
Auto
Acquisition
Area
Threatening
target
Lost Target
AUTO TARGET
FULL
Target Full
Mark
Figure 6-2 ARPA display