Filter
Top Products
10
The error message may appear during conversion,
however leave the message displayed until the
conversion is completed.
The list in the [Conversion List] becomes blank after
conversion is completed.
10. Place the cursor on the [Close] button of the
[SENC CONVERT], [Failed SENC conversions]
and [Catalogue] and press the [SELECT] key to
close the windows.
The message [FAIL CONVERSION] may appear
during the conversion. If this occurs, press the
[CHART PLAN] key, place the cursor on {CELL
STATUS], press the [SELECT] key and confirm that
the date has been updated at [SENC] in the [CELL
STATUS] window. And also, press the [CHART
PLAN] key, place the cursor on [CATALOGUE],
press the [SELECT] key and confirm that the charts
updated now are shown in green on the chart
screen. This completes the procedure for updating
charts.
[Error]
List becomes blank after conversion
is completed.
[Conversion List]