Filter
Top Products
4
3. Displaying the Catalogue Chart
1. Press the [CHART PLAN] key to display the
menu.
2. Place the cursor on the [Catalogue] and press
the [SELECT] key.
3. Check on the [Name] and [Catalogue charts]
check boxes and select [CD] in the [View filters]
window.
4. Place the cursor on the down arrow in the [CD]
box, press the [SELECT] key and select the
catalogue name entered at step 5 in the
previous section.
Note: We recommend that you check off the
[Overview] check box in the [Navigation
purpose]. This will omit the loading of the
zoomed-out charts, which are normally not
used and the ECDIS has already installed
these types of chart (7C type). Conversion
time can be reduced by not loading the
“Overview” charts.
5. Using the [ZOOM IN], [ZOOM OUT] or [SET
CHART CENTER] key, adjust the catalogue
chart scale so that you can see all charts
desired.
[NAME]
[Catalogue Charts]
[CD]
Choose catalogue name.
[Overview]
[Catalogue]