Filter
Top Products
2
2. For unibody mounting;
a) Fasten the bracket at the rear of monitor and control units with four binding screws (M4x10).
1
1
2
2
3
3
4
4
Bracket (rear view)
Bracket, rear view
3. For separate/blackbox mounting;
a) Dismount the coupling plate to separate monitor unit and control unit.
b) Attach the bracket at rear of the monitor unit with four binding screws (M4x10).
1
2
3
4
1
2
3
4
Bracket (rear view)
Bracket, rear view
4. Coat threads of upset screws (M6x16, 2 pcs.) used to fasten bracket to mounting base.
5. Fasten the bracket to the mounting base with two upset screws. (Use the upper holes to tilt
the monitor unit 20°; lower holes to tilt it 9°.)
Upset Screw
HANGER
MOUNTING
BASE
Fastening hanger to mounting base