Filter
Top Products
2-7
2.4 Interface Unit
Earth
NAV
Control
unit
cable
MJ-A10SPF0002
(1.5/5 m)
VGA
monitor
Monitor unit
cable
06S4078
Transceiver unit cable
06S4078
Connect to ship's earth.
DATA/VIDEO IN DATA/VIDEO OUT
RGB OUT
CONT
NMEA
The blackbox type requires connection of a VGA monitor, via the interface unit
IF-8000. Supply monitor and interconnection cable (Max. length 15 m with
Dsub-15P connectors of male, three rows of 15 pins). The monitor used should
satisfy the specifications shown below.
• VGA type
• ANALOG RGB 0.7 Vpp, positive polarity
• TTL level H, V, Negative polarity
Note 1: Two interface units can be connected to the transceiver unit in parallel.
Note 2: When using DATA/VIDEO OUT port, cut and remove the rubber covers
as below to attach connectors to the interface unit.
Cut and remove
the covers.
Remove the
fixing metals.
Note 3: Connect control unit or navigator equipment to either interface unit or
monitor unit (supplied by FURUNO).
Note 4: When connecting the monitor unit MU-100C to the interface unit, or two
interface units in parallel to the transceiver unit, the length of cables should be
as shown in the figure on next page. Note that two cables 06S4078 (10 m
length) cannot be used.