9-4
Replaying Saved Data
Whole picture or echo inside estimate mark
1. Press the RECALL key (on the main panel).
2. Press the right or left arrow key in sub panel 1 to select item
to replay. The left arrow key selects older data (for example,
data in memory card); the right arrow key newer (for ex-
ample, data in internal memory).
3. After viewing picture, press the RECALL key to escape.
Note that the priority order for replay of echo inside estimate
mark is internal memory-saved picture followed by memory card
contents.
Net shooting data
1. Press the NET REPLAY key (on sub panel 1).
2. At the screen bottom, comments are listed. Select the item to
replay.
3. After viewing the data, press the NET REPLAY key again to
escape.
Deleting Memory Card Contents
You can delete unnecessary data from a memory card.
1. Press the MENU key to display the USER menu.
2. Select the CARD UTILITY menu and press the MENU key.
3. Select the DELETE and press the MENU key. The card con-
tents are listed at the screen bottom.
4. Select data to delete.
5. Press the MENU key.
6. Press the END key a few times to close the menu.