Filter
Top Products
4-12
Positioning guide pins
The guide pins of the connector identify the mating receptacle. Position them as shown in the
table below.
Table 4-4 Connectors CN-C1, CN-C2, CN-C3, CN-C4 and guide pins
Connector
Guide Pin
CN-C1 CN-C2 CN-C3 CN-C4 Guide Pin Setting Tool
Guide Pin A (Large) 2113
Guide Pin B (Small) 1111
Type 10-910-0179-0
Clamping the cable
Anticorrosive sheath
Cable clamp
Figure 4-20 Clamping the cable
Fabrication of cable 10S1261 (connected to terminal board TB-D1
in raise/lower control box)
Shield
Anticorrosive
sheath
Vinyl tape
Fold back shield onto
anticorrosive sheath.
35
90
M3 (RED) x 12
Figure 4-21 Fabrication of cable 10S1261