Filter
Top Products
2-13
RT-9183
C6
C8
C42
JP13
rewoPeriwrepmuJ
31PJ
CAV001trohS
CAV022evomeR
2.3 Changing Power Specifications
This radar can be powered by 100V AC or 220V AC, and is set at the factory for connection to
a 100V power supply. To power the unit by 220V AC, remove jumper JP13 on the POWER
Board as shown in the procedure below.
CAUTION
Turn off the power before executing the procedure
shown below.
Procedure
1) Turn off the power.
2) Unfasten the four screws circled in the
illustration at right.
3) Remove the power assembly.
4) Remove the power assembly cover.
5) For 220V power supply, remove jumper
wire JP13 on the POWER Board.
6) Mount the power assembly.