Filter
Top Products
3. SETTING AND ADJUSTMENT
3-21
3.7.3 Choosing External Radar (image source)
Select the external radar to use in the dual radar display.
1. Open the INITIALIZE menu.
2. Press the [3] key to show the SCANNER menu.
3. Select 9 [DUAL RADAR] and push the left button.
1BACK
2 DUAL RADAR
OFF/MIX/COMBINE
3 COMBINE MODE*
OWN/EXT
4 COMBINE SECTOR*
START 000°
ANGLE 000°
5 COMBINE RANGE*
START 00.00NM
LENGTH 00.00NM
6 EXT RADAR
1/2/3/4
[DUAL
RADAR]
* Shown when 2 DUAL RADAR
is set for other than "MIX".
4. Select 6 EXT RADAR and push the left button.
5. Select
desired radar no. and push the left button.
Only the numbers of connected radars are valid. Radar no. is set on the Installation Setting
menu.
6. Press the [MENU] key to close the menu.