Filter
Top Products
2-4
7. Using the terminal opener provided, connect cores (except coaxial cable) to their appropriate
locations on TB801 on the PCB 03P9436. Refer to the interconnection diagram for wiring
details.
How to wire WAGO connector
Antenna unit, front view
Procedure
1. Twist core.
2. Insert terminal opener as shown and push down.
3. Insert core into hole.
4. Release terminal opener.
5. Tug on wire to confirm that it is firmly in place.
Terminal
opener
WAGO connector
Wire
Twist.
Push down.
Terminal TB901
TB802 on
PCB 03P9435
Fix coax cable with
with this clamp.
Cable gland for
power cable (TPYCY-2.5)
Cable gland for
HV cable (TPYCY-1.5)
Fasten shield of si
g
nal cable here.