Filter
Top Products
1. OPERATIONAL OVERVIEW
1-32
1.21.4 How to restore a profile to the default settings
1. Click [ ] on the Status bar then click [Manage Profile].
2. Select a profile number from the “Profile” drop-down list.
3. Click [Restore Default Settings]. The confirmation message "Attention: This profile
will be restored to the default. Do you wish to continue?" appears.
4. Click [Yes].
Note: This setting for the default is available when selecting a profile to activate next
time (see paragraph 1.21.3).
1.21.5 How to change the settings on the current display to the rec-
ommended settings
1. Click [ ] on the Status bar.
2. Click [Default Settings]. The confirmation message "Attention: Settings will be
changed to the default. Do you wish to continue?" appears.
3. Click [Yes]. The settings on the following table are changed to the recommended
settings.
Note: This function is not available when using the interswitch function (see
section 2.29).
Items Settings
RAIN, SEA AUTO
GAIN, EAV No change
Automatic Clutter Elimina-
tion (ACE)
OFF
TUNE (other than solid
state radar)
TUNE AUTO
TX CH (for solid state ra-
dar)
No change
RANGE 6 NM, 6 SM, 6 km, 6 kyd
VRM1 0.25 NM, 0.25 SM, 0.25 km, 0.25 kyd
VRM2 OFF (No change)
EBL1 ON (No change)
EBL2 OFF (No change)
Presentation mode North-up TM
Note: Head-up RM with no heading or position data.
Off Center The ship’s position is put beyond 75% of the range scale.
Trail Trail time: 6 min, Trail mode: True-G
Past POSN OFF
Lost TGT OFF
TT ACQ No change
Note: TT OFF with no heading data.
Vector Vector time: 6 min, Vector reference: REL
AZ1, AZ2 (acquisition
zone)
OFF
AIS DISP ALL
Note: FUNC OFF with no heading or position data.
Association TT (>)
CPA/TCPA CPA: 2 NM, TCPA: 12 min