Filter
Top Products
2-6
2.2 Display Unit Connections
Two cables are terminated at the display unit: the signal cable RW-4873 or RW-6895 and the
power cable. The signal cable, available in lengths of 15m, 20m or 30m, comes with a connec-
tor preattached to it for connection to the display unit.
Figure 2-10 How to fabricate
power cable DPYCY-3.5
15 mm
Clamp here
Taping
(a)
(b)
(d)
Vinyl jacket
Armor
DPYCY-3.5
5 mm
Terminal cap
(c)
10 mm
Approx. 150 mm
FV5.5-4
Fabricating power cable DPYCY-3.5
1) Remove the vinyl jacket by 150mm.
2) Cut off jute tape wrapped around the braided
shield.
3) Unravel the braided shield to expose the cores
by about 120mm.
4) Slip the terminal cap onto the core.
5) Remove insulation of cores by about 10mm.
Fix crimp-on lugs FV5.5-4 to the cores and
braided shield.
6) Cover the braided shield with vinyl tape, leav-
ing the portion which will lie inside the cable
clamp untaped.
Core
S = 3.5 mm
φ = 2.4 mm
2
Armor
Vinyl sheath
(sectional view)